Soubory do Shapes

B

Borek

Cestující
Zdravím,

měl bych dotaz, při spouštění kterékoliv aktivity, i Explore route, mi vyskočí tyto hlášky :

No extended shape data for cd_3720009.s
Faile to open shape file .../cd_372009.s
Shape failed to load cd_372009.s
Can't add car cd_372_009 (uid:200000) to world

Kde seženu ty soubory, počítám tedy, že právě ten jeden (cd_372009.s) ? A jestli to chápu, stačí ho plácnout do shapes a vše pojede ?

Udšlal jsem dnes v noci kompletní upgrade z DVD verze 70.1 na nynější a zas to hází chyby :-(
 
Borek napsal:
Zdravím,

měl bych dotaz, při spouštění kterékoliv aktivity, i Explore route, mi vyskočí tyto hlášky :

No extended shape data for cd_3720009.s
Faile to open shape file .../cd_372009.s
Shape failed to load cd_372009.s
Can't add car cd_372_009 (uid:200000) to world

Kde seženu ty soubory, počítám tedy, že právě ten jeden (cd_372009.s) ? A jestli to chápu, stačí ho plácnout do shapes a vše pojede ?

Udšlal jsem dnes v noci kompletní upgrade z DVD verze 70.1 na nynější a zas to hází chyby :-(
Rozbalte kliknutím...

No, tohle znamená, že soubor cd_372009.s je na svém místě, ale něco (pravděpodobně textury nebo .sd soubor) mu chybí. Podle názvu je to bastard Jardy Skůry, ale proč není komplet to musíš vědět pouze ty :)
 
Borek napsal:
No extended shape data for cd_3720009.s
Faile to open shape file .../cd_372009.s
Shape failed to load cd_372009.s
Can't add car cd_372_009 (uid:200000) to world
Rozbalte kliknutím...
Pánové nevím, ale všimněte si toho tučného. V jednom ze zápisů má nulu navíc. Tak jestli není problém v tomto. Po tom, jak se tam dostala, pátrat nebudu. Pokud je to překlep pisatele v hlášce při přepisu, tak na toto nereagujte.
 
Bude to překlep, omlouvám se.

Nicméně, měli jste pravdu, stačilo stahnout model a hláška se neobjevuje. Bicméně objevila se jiná loko, a zase a zase... momentálně stahuji již pátý model.

Přitom Trainset jsem aktualizoval dobře a dle návodu, jak je možné, že je tam tolik chyb ?

A druhá věc - není nějaký externí prográmek, který by trať "očuchal" za mě, abych nemusel stále dokola pustit sim, nehrát aktivitu, přečíst si chybové hlášky, čímž sim spadne.. a tak porád dokola ? Nějaká utilitka by mi to usnadnila velmi...
 
Borek napsal:
Bude to překlep, omlouvám se.

Nicméně, měli jste pravdu, stačilo stahnout model a hláška se neobjevuje. Bicméně objevila se jiná loko, a zase a zase... momentálně stahuji již pátý model.

Přitom Trainset jsem aktualizoval dobře a dle návodu, jak je možné, že je tam tolik chyb ?

A druhá věc - není nějaký externí prográmek, který by trať "očuchal" za mě, abych nemusel stále dokola pustit sim, nehrát aktivitu, přečíst si chybové hlášky, čímž sim spadne.. a tak porád dokola ? Nějaká utilitka by mi to usnadnila velmi...
Rozbalte kliknutím...

Existuje a jmenuje se ConBuilder.
 
Naposled editoval moderátor:
Díky, stáhl nainstaloval, otestoval... V jediné aktivitě 61 errorů chybějících shapes :-(

Cosi je shnilého ve státě dánském, přitom jsem vše stahoval pečlivě.. :-(

[Engine SHAPE FILE]
The shape file cd_122004.s specified by the file CD_122004.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( cd_122004.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file cd_122004.sd belonging to the file CD_122004.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_122\
----------------------------------------
[Engine SHAPE FILE]
The shape file cd_122039.s specified by the file CD_122039.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( cd_122039.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file cd_122039.sd belonging to the file CD_122039.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_122\
----------------------------------------
[Engine SHAPE FILE]
The shape file cd_123019.s specified by the file CD_123019.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( cd_123019.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file cd_123019.sd belonging to the file CD_123019.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_123\
----------------------------------------
[Engine SHAPE FILE]
The shape file 130009.s specified by the file 130009.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 130009.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 130009.sd belonging to the file 130009.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_130\
----------------------------------------
[Engine SHAPE FILE]
The shape file cd_130033.s specified by the file CD_130033.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( cd_130033.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file cd_130033.sd belonging to the file CD_130033.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_130\
----------------------------------------
[Engine SHAPE FILE]
The shape file 130040.s specified by the file 130040.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 130040.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 130040.sd belonging to the file 130040.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_130\
----------------------------------------
[Engine SHAPE FILE]
The shape file cd141_045.s specified by the file 141045.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( cd141_045.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file cd141_045.sd belonging to the file 141045.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_141\
----------------------------------------
[Engine SHAPE FILE]
The shape file 150006.s specified by the file 150006.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 150006.s )
----------------------------------------
[SHAPE FILE ERROR]
The shape definition file 150006.sd located in the folder
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_150\
is pointing to a file named 150006.s that doesn't seem to exist in the same folder.
Check that the shape filename is correct.
The error was found on this line: Shape ( 150006.s
----------------------------------------
[Engine SHAPE FILE]
The shape file 150015.s specified by the file 150015.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 150015.s )
----------------------------------------
[SHAPE FILE ERROR]
The shape definition file 150015.sd located in the folder
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_150\
is pointing to a file named 150015.s that doesn't seem to exist in the same folder.
Check that the shape filename is correct.
The error was found on this line: Shape ( 150015.s
----------------------------------------
[Engine SHAPE FILE]
The shape file 151001.s specified by the file 151001.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 151001.s )
----------------------------------------
[SHAPE FILE ERROR]
The shape definition file 151001.sd located in the folder
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_151\
is pointing to a file named 151001.s that doesn't seem to exist in the same folder.
Check that the shape filename is correct.
The error was found on this line: Shape ( 151001.s
----------------------------------------
[Engine SHAPE FILE]
The shape file 162054.s specified by the file 162054.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 162054.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 162054.sd belonging to the file 162054.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_162\
----------------------------------------
[Engine SHAPE FILE]
The shape file 163064.s specified by the file 163064.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 163064.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 163064.sd belonging to the file 163064.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_163\
----------------------------------------
[Engine SHAPE FILE]
The shape file 163100.s specified by the file 163100.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( "163100.s" )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 163100.sd belonging to the file 163100.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_163\
----------------------------------------
[Engine SHAPE FILE]
The shape file CD_182048.s specified by the file CD_182048.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( CD_182048.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file CD_182048.sd belonging to the file CD_182048.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_182\
----------------------------------------
[ANIMATION SHAPE FILE]
The animation shape file CD_182048_2.s specified by the file CD_182048.ENG
is missing from the folder
cd_182\CD_182048.eng
The error was found on this line: Freightanim ( CD_182048_2.s 1 1 )
----------------------------------------
[Engine SHAPE FILE]
The shape file CD_452017.s specified by the file CD_452017.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( CD_452017.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file CD_452017.sd belonging to the file CD_452017.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_452\
----------------------------------------
[Engine SHAPE FILE]
The shape file CD_452018_z_bs.s specified by the file CD_452018_Z_BS.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( CD_452018_z_bs.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file CD_452018_z_bs.sd belonging to the file CD_452018_Z_BS.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_452\
----------------------------------------
[Engine SHAPE FILE]
The shape file 471015.s specified by the file 471015.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 471015.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 471015.sd belonging to the file 471015.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_471\
----------------------------------------
[ANIMATION SHAPE FILE]
The animation shape file strojved.s specified by the file 471015.ENG
is missing from the folder
cd_471\471015.eng
The error was found on this line: FreightAnim ( strojved.s 0.1 0.1 )
----------------------------------------
[Engine SHAPE FILE]
The shape file 471015rv.s specified by the file 471015RV.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 471015rv.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 471015rv.sd belonging to the file 471015RV.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_471\
----------------------------------------
[Engine SHAPE FILE]
The shape file 703045.s specified by the file 703045.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 703045.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 703045.sd belonging to the file 703045.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_703\
----------------------------------------
[Engine SHAPE FILE]
The shape file 725268rv.s specified by the file 725268RV.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 725268rv.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 725268rv.sd belonging to the file 725268RV.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_725\
----------------------------------------
[Engine SHAPE FILE]
The shape file cd_731006.s specified by the file CD_731006.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( "cd_731006.s" )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file cd_731006.sd belonging to the file CD_731006.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_731\
----------------------------------------
[Engine SHAPE FILE]
The shape file 740721.s specified by the file 740721.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 740721.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 740721.sd belonging to the file 740721.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_740\
----------------------------------------
[Engine SHAPE FILE]
The shape file 740751.s specified by the file 740751.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 740751.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 740751.sd belonging to the file 740751.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_740\
----------------------------------------
[Engine SHAPE FILE]
The shape file 749008.s specified by the file 749008.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 749008.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 749008.sd belonging to the file 749008.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_749\
----------------------------------------
[Engine SHAPE FILE]
The shape file 810007.s specified by the file 810007.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 810007.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 810007.sd belonging to the file 810007.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_810\
----------------------------------------
[Engine SHAPE FILE]
The shape file cd_843026.s specified by the file CD_843026.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( cd_843026.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file cd_843026.sd belonging to the file CD_843026.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_843\
----------------------------------------
[Engine SHAPE FILE]
The shape file 971015rv.s specified by the file 971015RV.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 971015rv.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 971015rv.sd belonging to the file 971015RV.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_471\
----------------------------------------
[ANIMATION SHAPE FILE]
The animation shape file strojved.s specified by the file 971015RV.ENG
is missing from the folder
cd_471\971015rv.eng
The error was found on this line: FreightAnim ( strojved.s 0.1 0.1 )
----------------------------------------
[Engine SHAPE FILE]
The shape file 971015.s specified by the file 971015.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 971015.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 971015.sd belonging to the file 971015.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_471\
----------------------------------------
[Engine SHAPE FILE]
The shape file zssk_350001.s specified by the file ZSSK_350001.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( zssk_350001.s )
----------------------------------------
[SHAPE FILE ERROR]
The shape definition file zssk_350001.sd located in the folder
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\ZSSK_350\
is pointing to a file named zssk_350001.s that doesn't seem to exist in the same folder.
Check that the shape filename is correct.
The error was found on this line: Shape ( zssk_350001.s
----------------------------------------
 
Pane, nehledejte v tom vědu, ale stáhněte si rovnou z mých stránek. Tam je odkaz na MSTS SINUS a elektrické lokomotivy jsou zde:
http://msts.sinus.cz/show_files.php?Group=20
Problém je v tom, že tato řada se updatovala a odkazy v s ukazují na jiné textury, než máte na HD v BP muzeum.
Na všechny lokomotivy a vozy v MSTS Sinus nevím jestli Karel updatoval archivy 3. uptate trainsetu, ale 4, určitě ne. Proto doporučuji ve finále postupně všechny updaty postupně nainstalovat. Díky Karle, že tohle ještě máme aktivní.
 
Naposled editoval moderátor:
Nehledám v tom vědu, stahuji jak divý. Už mám jen jediný problém a to je tato hláška :

[NAME ERROR]
The engine file zssk_350001.eng in the folder
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\ZSSK_350\
does not match with the name found on the line "Wagon".
Edit this file and make this line the same as its file name without the .eng extension.
A difference in capitalization or a wrong linefeed character can also generate this error.
The error was found on this line: WagonShape ( zssk_350001.s )


ZSSK_350 jsem stáhl a rozbalil, ale žádná změna, vše je rozbaleno korektně a tak jak má..
 
Jenom namátkou - podobné problémy se tam vyskytují častěji - ve většině případů z tohohle výpisu bych na to tipoval.
Borek napsal:
[Engine SHAPE FILE]
The shape file cd_122004.s specified by the file CD_122004.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( cd_122004.s )
Rozbalte kliknutím...
V tomto případě bych vsadil na to,že to Conbuilder testuje v režimu case sensitive - zkus v tom engu změnit velké CD na malé cd - a to nejen v názvu souboru, ale i uvnitř - a nebo u s souboru změň malé cd na velké CD a pak to musíš upravit i v engu ve WagonShape a v sd souboru taky.

Zase na druhé straně - MSTS by toto vadit nemělo. On je CB trošku přecitlivělý.


Borek napsal:
[Engine SHAPE FILE]
The shape file 130009.s specified by the file 130009.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 130009.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 130009.sd belonging to the file 130009.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_130\
----------------------------------------
[Engine SHAPE FILE]
The shape file cd_130033.s specified by the file CD_130033.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( cd_130033.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file cd_130033.sd belonging to the file CD_130033.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_130\
----------------------------------------
[Engine SHAPE FILE]
The shape file 130040.s specified by the file 130040.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 130040.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file 130040.sd belonging to the file 130040.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_130\
----------------------------------------
[Engine SHAPE FILE]
The shape file cd141_045.s specified by the file 141045.ENG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( cd141_045.s )
----------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file cd141_045.sd belonging to the file 141045.ENG
should have the same name as the shape file.
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\CD_141\
----------------------------------------
Rozbalte kliknutím...
Tady bych tipoval na nesoulad odkazu na *.s soubor v engu a sd souboru - mělo by to být stejné a hlavně by se sd a eng soubor měl taky jmenovat stejně ( markantní je to u 141_045.sd a 141045.eng).

Zkus to opravit a uvidíš, jestli to zabere.
 
Borek napsal:
Nehledám v tom vědu, stahuji jak divý. Už mám jen jediný problém a to je tato hláška :

[NAME ERROR]
The engine file zssk_350001.eng in the folder
C:\PROGRAM FILES (X86)\MICROSOFT GAMES\TRAIN SIMULATOR\TRAINS\TRAINSET\ZSSK_350\
does not match with the name found on the line "Wagon".
Edit this file and make this line the same as its file name without the .eng extension.
A difference in capitalization or a wrong linefeed character can also generate this error.
The error was found on this line: WagonShape ( zssk_350001.s )


ZSSK_350 jsem stáhl a rozbalil, ale žádná změna, vše je rozbaleno korektně a tak jak má..
Rozbalte kliknutím...

Tady je problém v tom, že v engu v sekci Wagon (bacha - je tam 2x) máš napsáno asi něco, co neodpovídá názvu engu - musí to být stejné, čili zssk_350001
 
bob57_cz napsal:
A nakonec se dostaneme tam, co jsem psal nahoře hned jako první radu !!!
Rozbalte kliknutím...
Ano je to tak, po vyzkoušení všech možností se vrátíme a použijeme to co navrhoval první.
Murphyho zákony (paragraf si nepamatuji) platí stále..... :lol: :lol:
 
Mno, tak nevím, postahoval jsem vše, co se dalo, nainstaloval a stejně :

60x podobná hláška :

[Wagon SHAPE FILE]
The shape file 010modry.s specified by the file 010MODRY.WAG
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( 010modry.s )

Přičemž to není o case sensitive, protože přepsání na velká písmena nepomáhá, ten soubor 010modry.s skutečně ve složce Shapes není.. kde je chyba, prosím ?

EDIT : Není ani v žádné jiné složce Train Simulatoru, jen pro doplnění...
 
No ja by som skusil prejst vsetky .s subory co v tej zlozke su, v SViewe, najst tam nejaku modru 010 a potom vsetko 010modry.s prepisat na ten .s v ktorom to je. Ked subor absentuje, prepisovanie velkych na male a spat logicky nemoze pomoct, lebo kde nic neni ani smrt nebere ... toboz aby bral MsTS ...
 
Borek: Tak jedine este stiahnut TgaTool a presacovat textury :? Alebo si nainstalovat XP. Visty sa musia este nechat zabehat.
 
Už choď spať, už na to ani nevidíš ... MsTS mu zjavne funguje, ale SView mu nejde spustiť :!: :!: :!: :twisted:
 
Ve foru, někdo hyperaktivně bez náhrady zamknul dost důležitý dotaz.
Borek se ptal
Simulátor mi řve, že nemá daný vagon v Trainsetu a opravdu tam chybí.. Na Sinusu jsem jej nenašel, je někde ke stažení ? Díky...
Rozbalte kliknutím...
Odpověď: Když stáhnu 3. update Trainsetu, tak je tam v readme psáno, které vozy je nutné smazat bez náhrady a to je i tázané Byméčko. Tyto jsou nově pod správným označením cd_Bdmtee.
Jelikož řve MSTS, že takový vůz chce z toho pane Borek vyplývá další nebezpečí a to, že jste si do MSTS nainstaloval pravěk aktivity s pravěk consisty a dostal do začarovaného kruhu, kdy MSTS v žádném případě nespustíte. Také je na tuto skutečnost v readme upozorněno. Staré aktivity přesunout do pryč včetně consists. Pokud jste měl nějakou oblíbenou aktivitu, kterou jste musel takto vyřadit, kontaktujte autora aktivity, jestli nemá aktuálnější verzi, nebo si takovou musíte opravit sám. To samé se týká tras v trati, protože probíhají občasné rekonstrukce kolejí a vyhýbek a tímto se starší trasy znefunkční. Kdo ví jak, musí si opravovat i tohle. Jen tak mimochodem, po aktualizaci 79 bude tohle opět třeba jak v oblasti Masaryčky, tak v oblasti Prahy hl. n. Mých aktivit se to dotklo všech, ale samozřejmě vydám opravu.
 
Pro psaní příspěvků je nutné se přihlásit či zaregistrovat.
Back
Nahoře